Sub-division › Module › Sub-module › Parts. Always-needed items appear in every design; optional ones only in some, like a differential, which triple-bogie rovers don't have.
Blue tags name the reusable block a sub-module is built from. Tap one to see where else it's used.
Each sub-module lists what ARCh, ARC, URC and ERC require, score, limit or ban. Pick one competition to see only its rules; a red edge marks a part that competition bans.
Twelve real rovers were broken down into the tree. Each one taught us something about what the tree must allow.
That is 18 hardware modules plus 4 process modules (CAD, analysis, manufacturing, integration). A complete rover needs at least 21 modules and 50 sub-modules. None of the 12 designs needed anything outside the tree: each design only switches optional items on or off. The one optional module is Steering, which skid-steer rovers leave out.
The 2027 rulebooks add 3 new modules and 10 new sub-modules for competition items such as lifting points, a water extraction unit and a drone airframe. Each switches on only for the competitions that ask for it, so the counts above stay the same for a rover built for one competition.
Rotary actuator, Linear actuator, Pivot joint, Structural member, Mounting interface, Stops & latches, Cable pass-through, Sealed cover. For example, the wheel drive, the arm's base joint, the drill spindle and the camera pan-tilt head are all the same rotary actuator. NASA's rovers do the same: every Curiosity actuator came from one design family [3], and all seven Perseverance caching joints use the same gear-motor type [4].
Folders are named by what a part does, not by one design, and every optional sub-module has its folder from day one with an ACTIVE or INACTIVE note. Changing design changes files and notes, not paths. A truly new function, such as walking legs, is added with a new ID, which never touches existing folders.
The 2027 rulebooks were a real test of this. They added 3 new modules and 10 new sub-modules (M1.4, M4.6, M5.4, SM3.4.5, SM5.3.3). Each one got a new ID next to its siblings, and no existing folder moved.
| If we switch… | What changes | Folders moved |
|---|---|---|
| Rocker-bogie → split-body chassis on whegs (WVU-style) | Activate SM1.1.3 Body Articulation Joint; mark SM2.3.3 Differential inactive; SM2.1.1 Wheel/Wheg swaps its CAD. | None |
| Rocker-bogie → triple-bogie with wheel-walking (ExoMars-style) | SM2.3.3 inactive; SM2.3.4 Active Articulation Drive active; M2.2 Steering active on all 6 corners. | None |
| Skid steer → 4-corner steering (Perseverance-style) | Activate M2.2 Steering; SM2.2.1 instantiates U-01 four times. | None |
| Rotary-joint arm → linear-actuator arm + differential wrist (Thapar-style) | SM3.1.3 and SM3.2.2 switch from U-01 to U-02 inside the same folder; SM3.3.3 active. | None |
| Auger with internal cache → core drill with bit carousel | SM4.2.1 swaps bit CAD; SM4.2.5 Bit Exchange active. | None |
| Single rover → swappable arm / science modules (URC 50 kg per config) | Activate SM1.3.2 Modular Payload Interface; SM3.1.1 and ME-04 mounts adopt the same U-05 plate. | None |
rover-me/ # one repo for the ME division ├── README.md # current design + which items are active ├── ME-00_Library/ # the 8 building blocks ├── ME-01_Chassis-Structures/ │ └── M1.1_Primary-Structure/ │ ├── SM1.1.1_Main-Frame/ │ │ ├── cad/ drawings/ analysis/ test/ │ │ └── README.md │ └── SM1.1.3_Body-Articulation-Joint/ │ └── README.md # status: INACTIVE ├── ME-02_Mobility/ … ME-05_Masts-Deployables/ └── ME-06_CAD-Mfg-Integration/
concept/triple-bogie; freeze releases with tags such as urc27-sar.ME-02-SM2.3.1-003.The draft had 39 modules and 222 sub-items. The research tree has 22 modules and 72 sub-modules. Analysis and testing moved to their own sub-division, repeated parts became building blocks, and single parts became part lists. The 2027 rulebooks then added 3 new modules and 10 new sub-modules, shown in green.
| Draft item | Now | Why |
|---|---|---|
| 01.1 Primary Chassis | M1.1 Primary Structure | Kept; 'Load Paths' and 'Structural Reinforcement' are design properties, not parts. |
| 01.2 Secondary Structures | M1.3 Mounting & Payload Interfaces | Merged; one mounting module with a standard hole grid. |
| 01.3 Protective Structures + 01.4 Enclosures | M1.2 Enclosures & Protection | Two modules with overlapping items (Electronics Protection vs Electronics Enclosure) merged. |
| 01.5 Structural Analysis | M6.2 Engineering Analysis (SM6.2.3) | Activity, not hardware. Every module keeps an /analysis folder instead. |
| 01.6 CG & Mass | M6.2 System Budgets (SM6.2.1) | Budget, not hardware. |
| 02.1 Wheels + 02.2 Hubs & Axles + 02.4 Drivetrain | M2.1 Wheel & Drive Corner | One corner assembly per wheel; motors/gears/belts drop to unitary components. |
| 02.3 Bearings | U-03 Passive Pivot Joint (library) | Bearings appeared in 6 draft modules; now one reusable block. |
| 02.5 Suspension | M2.3 Suspension | Rocker / Bogie / Differential renamed by function so triple-bogie, 4-wheel rocker and split-body concepts fit. |
| 02.6 Terrain & Traction + 02.7 Mobility Analysis | M6.2 Kinematics & Load Cases | Requirements and analysis, not hardware. |
| (missing) | M2.2 Steering | Draft had no steering module although most concepts steer. |
| 03.1 Manipulator Architecture + 03.7 Manipulator Analysis | M6.2 Kinematics & Load Cases | DOF, workspace, FK/IK are analysis outputs. |
| 03.2 Base/Shoulder, 03.3 Arm Links, 03.5 Wrist, 03.6 End Effector | M3.1-M3.4 | Kept, now split by joint (task example: Wrist > Pitch Joint > Harmonic Drive). |
| 03.4 Joint Mechanisms | U-01 / U-02 (library) | Gears, belts, lead screws, harmonic drives are unitary components inside actuator units. |
| 04.1 Sampling Architecture | Removed (README of ME-04) | Concept of operations, not a module. |
| 04.2 Excavation + 04.3 Drilling | M4.1 Surface / M4.2 Subsurface Sampling | Split by function (surface vs 10 cm+), not by tool type. |
| 04.4 Sample Transfer + 04.5 Sample Processing | M4.3 Transfer & Processing | Merged; carousel/sieve become conditional sub-modules. |
| (missing) | M4.4 Sample Caching | URC requires a sealed, removable cache; draft only had 'Sample Storage' as a line item. |
| 04.6 Science Integration | M4.5 Instrument Accommodation + M6.4 | Mounting kept; testing moved to integration. |
| 05.1 Mechanism Design + 05.2 Actuation | U-01...U-06 (library) | Generic mechanism parts now live once in the library. |
| 05.3 Camera Mast + 05.4 Antenna Deployment | M5.1 Mast Assembly | Same column + head + lock pattern; instantiate twice. |
| 05.5 Latches & Locks | U-06 (library) | Used by 20+ sub-modules. |
| 05.6 Auxiliary Mechanisms | M5.2 Cargo Stowage + M5.3 Covers & Doors | Split into cargo (task-driven) and doors/covers. |
| 06.1 CAD + 06.2 Drawings + 06.7 Config & Documentation | M6.1 CAD & Configuration Control | One owner for models, drawings, BOM and revisions. |
| 06.3 Manufacturing + 06.4 CAM | M6.3 Manufacturing | CAM is a unitary item of fabrication. |
| 06.5 Mechanical Integration + 06.6 Mechanical Testing | M6.4 Integration & Test | Merged. |
IEEE format. The numbers match the citations in the Word document.